Just thought I'd share this:
Photo1 by brewerJP
I can't take credit for the idea but I haven't seen these around anywhere and had to have one once I used it. Basically - water goes in where the colder QD is. It floods the outer tube and spills over the edge. You put your wort sample in the middle tube and the sample is relatively quickly cooled. I have a bar with a washer welded on the end and some holes in the washer to help distribute the cooled sample (being careful not to pull the washer out of the sample because you don't want to aerate it).
Hope this helps someone!
Photo1 by brewerJP
I can't take credit for the idea but I haven't seen these around anywhere and had to have one once I used it. Basically - water goes in where the colder QD is. It floods the outer tube and spills over the edge. You put your wort sample in the middle tube and the sample is relatively quickly cooled. I have a bar with a washer welded on the end and some holes in the washer to help distribute the cooled sample (being careful not to pull the washer out of the sample because you don't want to aerate it).
Hope this helps someone!