I don't brew nearly as much as I should owning these products, so I'm putting up for sale a system that was purchased here a few years back. I believe the original own purchased them in 2010. I don't plan on shipping anything, and will sell the products individually or as a package. I will not part out the products however. This is a great package deal and you'll be hard pressed to find a better one.
I will knock money off the package for Blichmann Boilermaker trades, and/or a 10 gallon igloo cooler mashtun. I'm not stopping brewing, I just don't brew enough to keep these around!
Brass tacks:
Chill Wizard Details:
MoreBeer 14 Gallon Conical Heated/Cooled Fermenter:
I will gladly send pictures to serious inquiries.
Prost!
Dave
I will knock money off the package for Blichmann Boilermaker trades, and/or a 10 gallon igloo cooler mashtun. I'm not stopping brewing, I just don't brew enough to keep these around!
Brass tacks:
Full Package: $5650
orSabco Brew Magic V350MS - $5000
Chill Wizard - $500
MoreBeer Fermenter - $1450
Sabco Brew Magic Details:Chill Wizard - $500
MoreBeer Fermenter - $1450
This will come with all the parts and pieces I have for it. There is nothing missing. Tri-clamps, hoses, gaskets, false-bottoms are all included.
The stand is good condition. The burners are also in good condition. There have been some boil-overs so the stainless has some discoloration, but is only cosmetic. The plumbing is in great condition. I replaced the pump when I bought it, all works as expected.
The kettles are in good condition; the sight glasses could stand to be replaced (plastic gets hazy after 5 years), but they work fine. Also, again, there is some discoloration due to the temperature and boil-overs but it's only cosmetic.
I will clean up the stand as much as possible and the kettles are clean (no beer stone).
The stand is good condition. The burners are also in good condition. There have been some boil-overs so the stainless has some discoloration, but is only cosmetic. The plumbing is in great condition. I replaced the pump when I bought it, all works as expected.
The kettles are in good condition; the sight glasses could stand to be replaced (plastic gets hazy after 5 years), but they work fine. Also, again, there is some discoloration due to the temperature and boil-overs but it's only cosmetic.
I will clean up the stand as much as possible and the kettles are clean (no beer stone).
Chill Wizard Details:
I've bought a new plate chiller for the Chill Wizard and it's fully functional with all the hoses/connectors and bits and pieces I have for it (w/ pump priming bleeder valve).
MoreBeer 14 Gallon Conical Heated/Cooled Fermenter:
Fully functional, clean and is in good condition. The black insulator wrap is original and could be replaced if you care to. However, it works fine albeit a little flaky.
This will also come with all the bits and pieces I have for it (butterfly valve, tri-clamp, gaskets, ball valve)
This will also come with all the bits and pieces I have for it (butterfly valve, tri-clamp, gaskets, ball valve)
I will gladly send pictures to serious inquiries.
Prost!
Dave
Last edited: