Regulator hookup

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sbsmann

Well-Known Member
Joined
Mar 27, 2017
Messages
208
Reaction score
68
Location
Wisconsin
I got a new 2.5 gallon co2 tank and regulator but am not sure which parts go where when hooking up the regulator connection. Without any directions my best guess is these 3 small parts go together as pictured. What is that small gold piece and what purpose does it serve? Thanks.
20180511_172141.jpeg
20180511_171822.jpeg
20180511_171914.jpeg
20180511_171608.jpeg
20180511_171446.jpeg
 
You don't need teflon tape on gas connections as they should seal with the gasket. Just a tip in case you run out and panic when you're re-connecting the stuff :)
 
The small gold piece is a filter to keep dirt out of the regulator. I am surprised that it was not installed at the factory.

Thanks for the info. I don't recall any of those fittings on my other c02 tank in my kegerator.
 

Latest posts

Back
Top