Here's the recipe that I used:
2000ml starter with 250ml high viability slurry from a previous batch (washed 1056)
13.5# pale malt
6oz Crystal 35
10 oz. Carapils
MASH AT 149*
12oz. Dextros (15 Min. boil w/ 1 whirlfloc)
3.5 Columbus 90 min.
0.75 Columbus 45 min.
1.0 Simcoe 30 min.
1.o Centennial Flame out
2.5 Simcoe Flame out
1.0 Amarillo Flame out
Whirlpool 20 minutes
Primary 14 days, then,
1oz each DH all four hops 14 days
0.25oz each DH all four hops 7 days
28 days total
OG 1.078 (oops!)
FG 1.008
ABV 9.18% (oops again!)
Absolutely no alchohol burn, even after warming.
I brewed a second batch with a little different water profile, we will see how it works. (1.068 SG this time, 1.078 is too high)
Here's an absolute accurate recipe from a contract brewer of Russian River. You won't get any closer than this
Can someone downsize this for 5 gal batches?
Can someone downsize this for 5 gal batches?
Can someone downsize this for 5 gal batches?
Did you ever pick and brew a recipe?
Just finished brewing this but missed the OG, I got 1062 or so, which is disappointing as it seemed everything went rather well during the brew, and actually ended up short of 19L (5 US Gallons) in the fermenter after boiling... My efficiency must be pretty poor.
I have never tasted PTE so even if this doesn't work out a clone, hopefully it should still be a pretty tasty IPA?
I was a little worried about having a keg of beer this strong anyway so maybe its a blessing in disguise...
Here's an absolute accurate recipe from a contract brewer of Russian River. You won't get any closer than this
Cold crash the day before transfer to secondary? Or before transfer to serving keg? The latter I can see. Although why not just cold crash in the serving keg.
Cold crashing before secondary... I don't know if I want to do that. I kind of feel like, after 8 days, that the yeast are not going to be fully done doing there thing.
Any other lil tips appreciated to in regards to the recipe.
i.e.. when to add
Centennial 8.00% A.A. 0 min.
Simcoe 12.30% A.A. 0 min.
Just I read about lowering the temp then adding??
Enter your email address to join: