EyeofdaHawk
Member
Hi all
So am going to build my own control box. First off i'm ordering the parts. I decided to go a fully build myself due to the cost of a complete DYI or turn-key system. Also my system is will be a bit unique.
I plan on buying from Audering.com all the parts that i cannot source locally (in Aus). I wonder if ppl could look at my parts list below and tell me if i'm missing any major components. Should be able to get the generic fuses, wire etc locally.
My system is somewhat unique because i'm using 4x2200w heating elements for the HLT and BK (2 each). So have to get them all wired in together. Otherwise plan on a prety basic system, 3 way switch to select HLT/BK/Off element control, 2 buttons for the pumps, key start, alarm buzzer, DSPR310 and SYL-2352 (just for mash temp gauge).
EZboil for Step Mashing and Boiling Process Automation
Item #: DSPR310B
1/16 DIN PID Temperature Controller (For SSR)
Item #: SYL-2352
2-in-1 LCD Voltmeter Ammeter Gauge
Item #: DVA-120
Flashing Buzzer, 110 or 240V AC. 22 mm
Item #: FLBuz
Selector Switch, 3-Position Maintained 2 NO, 22mm
Item #: SW3
Illuminated Maintained Pushbutton Switch, 2 NO, 22mm. 120/240V
Item #: SW1
Illuminated Maintained Pushbutton Switch,1NO 1NC, 22mm.120/240V
Item #: SW11
3x Contactor, 2 pole, 30/40 A, 240V Coil
Item #: CN-PBC302-240V
4x 40A SSR
Item #: SRDA40
Wall Mount Box for Three Controllers 16x12x8"
Item #: B403020 - with heatsink
Emergency Stop (E-Stop) Switch, 22mm
Item #: SW6
Key Selector Switch, 2-Position Maintained, 22mm
Item #: SW8
Thanks
Hawk
So am going to build my own control box. First off i'm ordering the parts. I decided to go a fully build myself due to the cost of a complete DYI or turn-key system. Also my system is will be a bit unique.
I plan on buying from Audering.com all the parts that i cannot source locally (in Aus). I wonder if ppl could look at my parts list below and tell me if i'm missing any major components. Should be able to get the generic fuses, wire etc locally.
My system is somewhat unique because i'm using 4x2200w heating elements for the HLT and BK (2 each). So have to get them all wired in together. Otherwise plan on a prety basic system, 3 way switch to select HLT/BK/Off element control, 2 buttons for the pumps, key start, alarm buzzer, DSPR310 and SYL-2352 (just for mash temp gauge).
EZboil for Step Mashing and Boiling Process Automation
Item #: DSPR310B
1/16 DIN PID Temperature Controller (For SSR)
Item #: SYL-2352
2-in-1 LCD Voltmeter Ammeter Gauge
Item #: DVA-120
Flashing Buzzer, 110 or 240V AC. 22 mm
Item #: FLBuz
Selector Switch, 3-Position Maintained 2 NO, 22mm
Item #: SW3
Illuminated Maintained Pushbutton Switch, 2 NO, 22mm. 120/240V
Item #: SW1
Illuminated Maintained Pushbutton Switch,1NO 1NC, 22mm.120/240V
Item #: SW11
3x Contactor, 2 pole, 30/40 A, 240V Coil
Item #: CN-PBC302-240V
4x 40A SSR
Item #: SRDA40
Wall Mount Box for Three Controllers 16x12x8"
Item #: B403020 - with heatsink
Emergency Stop (E-Stop) Switch, 22mm
Item #: SW6
Key Selector Switch, 2-Position Maintained, 22mm
Item #: SW8
Thanks
Hawk
