o2 regulator

[DonH]

Well simply put, where did you folks snag an o2 regulator from? Everywhere I see them at almost $35 a piece? good lord! any tips? BTW I have the 2micron stone, and faucet riser that it fits perfectly on, just need to get the silicone tubing, the regulator and tank. Thanks!

-Don

 

[BigFloyd]

It depends on the type of tank you want to use.

I use this CGA540 flow valve on my welding O2 tank for oxygenating wort through a 0.5 micron SS stone. - http://www.amazon.com/Low-Cost-Regulators-Regulator-0-15LPM-CONNECTION/dp/B002J7FLTW/ref=sr_1_fkmr1_2?ie=UTF8&qid=1393949818&sr=8-2-fkmr1&keywords=cga540+idrive

 

[DonH]

Well I was thinking of using the small Tanks that Homedepot sells

 

[BigFloyd]

Well I was thinking of using the small Tanks that Homedepot sells

Then you would use the little valve that's peculiar to that tank. It's similar to their propane tank valve with the threads reversed.

 

[tally350z]

Got mine from williams brewing along with the oxygenating wand..

 

[AerationStation]

I snagged mine during a DOTD on MoreBeer! for about $30