Need opinion on this fridge....

[cutchemist42]

So buying a fridge for my keg. Checked out one and its definitely tall enough but only if i can remove the little part that acts as a freezer. From what i saw it had 4 screws attaching it with 1 screw attaching to a wire. Is it possible to remove the freezer part you think?

 

[CGVT]

Looks as if there are coolant lines in the bottom of the freezer. You won't be able to remove it. Some people have had luck carefully bending the freezer compartment down.

 

[onthekeg]

Yep. That is what cools the fridge portion. You can't remove it, only bend it carefully.

 

[JRems]

Looks like the haier fridge I have. Just take the screws off and bend slowly Until it touches the back above the hump. Make sure you remove the temp probe before you bend it. It can be reinstalled on the front side after it's bent.