March Brewing Pump

[Jcmccoy]

Hey all I want to get a pump but I don't know what items I needs to get with this pump so I can hook up a ball valve to silicone tubing.

http://morebeer.com/view_product/11622/103556/March_Brewing_Pump_New!_-_High_Flow

That pump a ball valve and what else?

I guess what I dont understand is do I need a extra nipple, MPT, or a barb.

 

[Bossbrew]

For the simplest setup, you will need 2 1/2" FPT to 1/2" barbed hose fittings (if your hose is 1/2"). Stainless or pickled brass is fine, use several wraps of teflon tape and don't tighten too much. Remember to mount with the input pointing down and the output pointing up, and try not to use T or elbow fittings at the pump to prevent cavitation. If the pump is in a potential wet area, be sure to protect it from spills. Have Fun!

Dave

Oh yeah, put the ball valve on the output...