Large Collection of (Mostly) SS Fittings

[fluxgame]

Over the years I've amassed a stupid collection of fittings, many of which are sitting in a box collecting dust. Time to clean house! Figure asking price is 2/3 of what each item sells for new. Feel free to try to talk me down. A picture and a complete list of everything is below. If you need better pictures of a particular item, let me know.

- Duda Diesel Heat Exchanger (DUDAHX-B3-36A-20ST), 3/4" FNPT threads, threads on 2 of the ports are rough
- Duda Diesel Heat Exchanger (DUDAHX-B3-36A-20ST), 1/2" MNPT threads
- Chugger inline pump head on March motor, 1/2" MNPT threads
- (3) 1-1/2" CPVC ball valves
- (5) 1-1/2" TC sanitary butterfly valves
- Dwyer flow meter, 0-100 GPH scale
- (2) Still Dragon electric element housings, 2" TC
- EBrewSupply electric element housing, 1-1/2" TC
- (2) home-made (soldered) electric element housings, 2" TC (similar to Still Dragons)
- (2) 1" NPS x 2" TC adapters
- (2) 1" NPS x 1-1/2" TC adapters
- home-made (soldered) 1" NPS x 1-1-1/2" TC adapter
- 2" TC ferrule, short
- 2" TC ferrule, long
- 1-1/2" TC ferrule, short
- (4) 1-1/2" TC x 1-1/2" hose barb
- 1-1/2" TC extension tube, 2"
- (20) 1-1/2" TC x 1/8" hose barb
- (2) weldless bulkheads, 1/2" MPT x 1/2" compression, with pickup tubes
- bulkhead fitting, 1/2" MPT x 1/2" compression
- 1-1/2" TC sample valve
- 2" pipe support
- 4" pipe support
- 1/2" FNPT 3-way valve
- (3) 3/4" MNPT x 3/4" hose barb
- (2) 8" long temperature sensor in 1-1/2" TC (DS18B20)
- 2" long, 1/2" MNPT thermowell
- (2) 8" long homemade thermowell in 1-1/2" TC
- 6" long homemade thermowell in 1-1/2" TC
- (2) 6" long temperature probe sleeves
- homemade combo thermowell/sight glass fitting in the 1-1/2" TC cap
- (7) 1-1/2" TC x 1-1/2" MNPT adapters
- Swagelok tee, 1/2" MNPT x 1/2" compression, 1/2" compression
- Swagelok tee, 1/2" MNPT x 1/2" compression, 1/2" compression, missing compression nuts
- (3) 1/2" NPT close nipples
- (4) 1/2" NPT hex nipples
- (2) 1/2" NPT 2" nipple
- 1/2" FNPT union
- (2) 1/2" x 3/4" hex bushings
- (2) 3/8" x 1/2" hex bushings
- 1/4" MNPT miniature check valve
- 1/4" FNPT union
- (2) 3/4" street elbows
- (3) 1/2" FNPT tees
- (4) 1/2" FNPT elbows
- 1/4" FNPT ball valve
- 1/4" FNPT x 1/4" MNPT ball valve
- (2) 1/2" FNPT x MGHT (brass)
- 1/2" FNPT x FGHT (brass)
- inline shank flow control
- 1/2" solenoid (brass)

 

[Santo]

pm sent

 

[Sauls]

Any chance you could reload the pic? Not showing

 

[fluxgame]

Any chance you could reload the pic? Not showing

Must be on your end, working fine here. Try this: https://drive.google.com/open?id=0B1HvQYYGJ7ZuMEpVQnk5dkRYOW15aFdxLWgybEpqWk1ZQjhz

 

[govner1]

Specific prices please

 

[bleme]

Thread rules require prices

 

[Jtvann]

Interested in the butterfly valves, but as others have said specific prices not only help, but are required.

 

[fluxgame]

Some context: I'm running a small brewery solo right now. We could use the cash so I'm making the effort to sell this stuff, but I don't have the time to figure out a fair price for all of these items. I'm mostly just trying to clean house though, so make a reasonable offer and I'll probably take it.

That said, I've priced some of the more expensive items below. The little stuff is all $5 each, or I'll toss in a few of those items with any larger purchase. Flat $10 to ship in the US.

- Duda Diesel Heat Exchanger (DUDAHX-B3-36A-20ST), 3/4" FNPT threads, threads on 2 of the ports are rough, need to be chased ($40)
- Duda Diesel Heat Exchanger (DUDAHX-B3-36A-20ST), 1/2" MNPT threads ($80)
- Chugger inline pump head on March motor, 1/2" MNPT threads ($100)
- (5) 1-1/2" TC sanitary butterfly valves ($30)
- Dwyer flow meter, 0-100 GPH scale, VFB-94D-SSV ($50)
- (2) Still Dragon electric element housings, 2" TC ($20)
- EBrewSupply electric element housing, 1-1/2" TC ($45)
- (4) 1-1/2" TC x 1-1/2" hose barb ($10)
- 1/2" FNPT 3-way valve ($20)
- (2) weldless bulkheads, 1/2" MPT x 1/2" compression, with pickup tubes ($25)
- 1-1/2" TC sample valve ($20)
- (2) 8" long temperature sensor in 1-1/2" TC (DS18B20) ($20)
- (3) 1-1/2" TC x 1-1/2" MNPT adapters ($12)

All $5 each, or best offer:
- (3) 1-1/2" CPVC ball valves
- Swagelok tee, 1/2" MNPT x 1/2" compression, 1/2" compression
- Swagelok tee, 1/2" MNPT x 1/2" compression, 1/2" compression, missing compression nuts
- (3) 1/2" NPT close nipples
- (4) 1/2" NPT hex nipples
- (2) 1/2" NPT 2" nipple
- 1/2" FNPT union
- (2) 1/2" x 3/4" hex bushings
- (2) 3/8" x 1/2" hex bushings
- 1/4" MNPT miniature check valve
- 1/4" FNPT union
- (2) 3/4" street elbows
- (3) 1/2" FNPT tees
- (4) 1/2" FNPT elbows
- (2) 1/2" FNPT x MGHT (brass)
- 1/2" FNPT x FGHT (brass)
- inline shank flow control
- 1/2" solenoid (brass)
- (2) home-made (soldered) electric element housings, 2" TC (similar to Still Dragons)
- (2) 1" NPS x 2" TC adapters
- (2) 1" NPS x 1-1/2" TC adapters
- home-made (soldered) 1" NPS x 1-1-1/2" TC adapter
- 2" TC ferrule, short
- 2" TC ferrule, long
- 1-1/2" TC ferrule, short
- 2" pipe support
- 4" pipe support
- 2" long, 1/2" MNPT thermowell
- (2) 8" long homemade thermowell in 1-1/2" TC
- 6" long homemade thermowell in 1-1/2" TC
- (2) 6" long temperature probe sleeves
- homemade combo thermowell/sight glass fitting in the 1-1/2" TC cap
- (3) 3/4" MNPT x 3/4" hose barb
- 1-1/2" TC extension tube, 2"
- (20) 1-1/2" TC x 1/8" hose barb
- bulkhead fitting, 1/2" MPT x 1/2" compression