John Guest fitting for 2-Faucet tower?

[uspino]

I have a standard 2-Faucet round kegerator tower with regular 3/16" Clear Beer Tubing. Is there a way I can convert the faucets' output to John Guest fitting? I'm not sure there is a right-angle adapter for 2 faucets in such a small space, and I wonder if anybody has figured out a solution. Thanks.

 

[Bobby_M]

No but you can change the shanks over to these Duotight Push-In Fitting - 6.5 mm (1/4 in.) x 8 mm (5/16 in.) Reducer | MoreBeer

 

[uspino]

No but you can change the shanks over to these Duotight Push-In Fitting - 6.5 mm (1/4 in.) x 8 mm (5/16 in.) Reducer | MoreBeer

Great idea, I'll go with that and report back. I wonder if there's a Duotight fitting for this kind of diy beer line cleaning kit using a Home Depot sprayer...

 

[Holden Caulfield]

^By going this route you can also change your lines to EVA which are so much better than clear beer tubing. Your first pours will not be oxidized. I made the change and the difference in the quality of the first pour was huge.