I'll be moving to a new place and will be able to brew beer in my garage using the High Gravity BIAB Electric Brewing System, both of which I hope to buy sooner than later.
I've been brewing all grain for several years using gas but the move has me seriously considering using a 62 quart kettle with a 4500 watt heating element that requires a 200volt 30amp ground fault outlet.
I was just wondering if any brewers out there might be willing to share with me their electric brewing knowledge, about heating and boiling 10 gallons of 1.060 or lower wort. I already planned on using some form of mechanical lifting device to raise the wet grain before the boil.
I've been brewing all grain for several years using gas but the move has me seriously considering using a 62 quart kettle with a 4500 watt heating element that requires a 200volt 30amp ground fault outlet.
I was just wondering if any brewers out there might be willing to share with me their electric brewing knowledge, about heating and boiling 10 gallons of 1.060 or lower wort. I already planned on using some form of mechanical lifting device to raise the wet grain before the boil.