Hey CO2 coming out of regulator (PIC)

[HeyPaulie]

Hey everyone, thanks for any help in advance...

First time kegging and have a new dual gauge regulator and new 5# CO2 tank. I went to hook everything and pressure test keg before I fill it so I attached the regulator to the CO2 tank and turned it on a little to check that the regulator is good and tight. When I turn it on all the CO2 just shoots out of the hole in what I guess is a pressure release, like on the top of the keg.

any ideas? Thanks!

 

[beaksnbeer]

Connect to tank open tank, pull pin that plastic tank seals or zip tied to and see if it will seat if not it maybe bad

 

[JRems]

The adjustment knob is probably tightened all the way, turn it counter clockwise all the way

 

[HeyPaulie]

Thanks for the suggestions guys. It took some messing around but it works now. I unscrewed that relief valave and tightened it extra good and now no CO2 comes out of the hole in it, unless I pull the pin of course Oatmeal Stout is now in the keg and hanging out for a couple weeks to carbonate.

Thought I was in trouble there for a while, thanks!