RockfordWhite
Well-Known Member
- Joined
- Dec 3, 2007
- Messages
- 473
- Reaction score
- 11
So, I have enough Experience with wiring to know how to actually wire things together from a diagram, but as for designing and knowing where all the wires go, i am clueless. So I am aiming to build something like this
http://zamonski.com/herms/pidcontroller.htm
Where one switch turns the PID on (which in turns powers a heat stick) and the other turns on my pump...
I have this PID (http://auberins.com/index.php?main_page=product_info&cPath=1&products_id=3)
Optimally i would like to have them control outlets rather than hardwiring things in. Thanks...
If somebody could help me with a diagram i can work off of i would be most appreciative.
http://zamonski.com/herms/pidcontroller.htm
Where one switch turns the PID on (which in turns powers a heat stick) and the other turns on my pump...
I have this PID (http://auberins.com/index.php?main_page=product_info&cPath=1&products_id=3)
Optimally i would like to have them control outlets rather than hardwiring things in. Thanks...
If somebody could help me with a diagram i can work off of i would be most appreciative.