spongebob1624
New Member
Hi guys,
I have bought a Sestos D1S VR PID, manual here
http://sestos-hk.com/english/download/D1S-EN.pdf
I have built a full copper valved refllux still that uses a 50 litre stainless steel beer keg as a boiler.
Inside there ia a 2400 watt stailnless steel element which is connected to a wall socket.
Attached to the PID is a 25A SSR which came witht the PID. A picture and specifications are here:
http://www.ebay.com.au/itm/25A-SSR-...Electrical_Test_Equipment&hash=item3cb8590b2e
I have wired the unit up to my boiler and am running a k thermocouple. The issue I have is trying to work out the wiring from the SSR to the heating element.
The ouput is 12v and the PID controls the SSR. So what or where does the element get its power from.
Would really apreciate some help here and a diagram if possible.
Regards
Spongebob @ Not an electrician
The element I am running is a 2400 Watt and our power is 240 V AC.
I have bought a Sestos D1S VR PID, manual here
http://sestos-hk.com/english/download/D1S-EN.pdf
I have built a full copper valved refllux still that uses a 50 litre stainless steel beer keg as a boiler.
Inside there ia a 2400 watt stailnless steel element which is connected to a wall socket.
Attached to the PID is a 25A SSR which came witht the PID. A picture and specifications are here:
http://www.ebay.com.au/itm/25A-SSR-...Electrical_Test_Equipment&hash=item3cb8590b2e
I have wired the unit up to my boiler and am running a k thermocouple. The issue I have is trying to work out the wiring from the SSR to the heating element.
The ouput is 12v and the PID controls the SSR. So what or where does the element get its power from.
Would really apreciate some help here and a diagram if possible.
Regards
Spongebob @ Not an electrician
The element I am running is a 2400 Watt and our power is 240 V AC.