With recent life changes I'm getting out of homebrewing and selling everything. Most of this will be local only (Salt lake city, utah) due to the size and difficulty in shipping these items, but I am open to shipping the smaller items if necessary (will note WILL SHIP after price). All items are OBO and all items must go!
- Professionally built all grain brewing stand. This is a true do it everything brew stand with many capabilities. The brew stand stores compactly on its side then quickly and securely folds out to a 2 or 3 tier stand. Each tier has 1 Bayou Classic Banjo propane burner (10 inch with electric ignition). All burners are adjustable in height to dial in the exact heat needed for your setup. Has a stainless work table with stainless utensil hooks that deploys for brew day and then hinge out of the way when it is time for clean up. Very portable and even has an integrated trailer hitch if you want to brew at a friend’s house or for a group brew day. Mounted on the stand are a March stainless head pump (cost $225) and Convolutus counterflow chiller (Cost $200). All have stainless quick disconnects and the stand includes the corresponding male/female disconnects and silicone lines. Also included are the hitch components, miscellaneous stainless heat shields and simmering heat diffusers, and other miscellaneous components. Could also be used for Herms or similar setup and leave the propane system unused. Cost over $1600 to build, asking $850/obo. For this price you are buying some of the components and getting the stand and other extras for free!
- 3 tap 6 keg beer fridge. This fridge can hold 6 Cornelius kegs on gas with 3 on tap. There are 2 internal gas regulators allowing you to pour at 2 different settings of your choice. Temperature is controlled by a Love controller which allows you to select your set point and the allowable temperature swing giving you much more control than most setups. Lines are Bev-Seal (lined) with quick disconnects. Faucets are Perlick Forward Seal stainless with removable spouts. I’m also including a CO2 tank (nearly full) with regulator and fittings. I have a lot invested in this fridge: $150 faucets, $100 controller, $275 in tubing and fittings, $150 in manifolds and gas equipment, $150 CO2 tank and regulator, and other miscellaneous parts, wiring and fittings. Asking ½ of what I have into it at $500 complete and ready to go (OBO).
- 3 homebrewing vessels. The first is a Blichmann boilermaker 20 gallon kettle. In near perfect shape and has not been used much. Has a 3 pc valve with quick disconnect, borosilicate sight glass, thermometer, stainless heat shields, and all the other Blichmann features that make their kettles so good. Also includes a Stainless Brewing stainless hop strainer kit (hop sock) with 2 choices of mesh. Also have extra o rings and fittings from Blichmann. Paid $150 for the hop strainer and $415 for the Blichmann kettle. Asking $300 for both.
- The second vessel is a 15 gallon stainless HLT tank (hot water). 100% stainless, and has a borosilicate sight glass, thermometer, 3 piece stainless valve, heat shield, and stainless pickup. All welding was done by a sanitary/brewing TIG process by a professional with the appropriate backpurge. Have $500 into it, asking $225.
- The third and last is a 15 gallon stainless insulated mash tun. 100% stainless vessel, and has a borosilicate sight glass, 2 thermometer, 3 piece stainless valve, return/recirculation port with thermometer, and heat shield. All fittings have quick disconnects. The false bottom is stainless and is a professionally modified Blichmann false bottom with pickup. All welding was done by a sanitary/brewing TIG process by a professional with the appropriate backpurge. Insulation is closed cell high density insulation surrounded by HDPE and the vessel holds temperatures very well over a 90 minute mash. Have $650 into it, asking $300.
- Cole Parmer stirplate used for homebrewing and yeast propogation. This is the 7x7 analog ceramic stirplate and retails for $317. Built to last a lifetime. Asking $100/obo. (WILL SHIP)
- Hannah 98128 PH meter for checking your process. This is an excellent unit and has only been used a handful of times for brewing, stored upright with the Hanna storage solution. Paid $129, asking $60/obo. Comes with extra solutions, all packaging, instructions, etc. (WILL SHIP)
- Homebrewing oxygenation system. Includes (2) oxygen bottles, flow regulators, flow meter, tubing, HEPA filter, and a stainless oxygenation stone. Asking $100obo.
- Monster mill grain mill. This is a Monster Mill MM2, with 6” dual rollers in 303 stainless. Mill is knob adjustable gap with a drill drive. Also includes the Monster base and hopper and also the extension set. Paid $280 for all of it and it has been used for less than 100lbs of grain since. Asking $200. (WILL SHIP, oversized box)
- Immersion chiller, ½” 50’ copper chiller. This works very well for chilling 5-15 gallon batches of wort. Cleaned and sanitized and ready to go. Northern Brewer and others charge upwards of $130 for the counterflow chillers, asking $65/obo.
- Carboys, both 5 and 6 ½ gallon. All come with a nylon Brew Hauler (much safer to carry), thermometer, handle, and vinyl calibration decals (showing your exact volume). All are in excellent shape, cleaned and sanitized. All are older premium quality carboys and not the newer knockoffs with inconsistent thickness glass. Paid $50 each for the 6.5 and $49 each for the 5 gallon and each has $28 in extras, asking $40/ea.
- I have a few ball lock corny kegs, all have been rebuilt and in excellent shape. asking $60/ea.
- I have a lot of miscellaneous buckets, tubing, thief, autosiphons, etc too numerous to post. (WILL SHIP smaller items)
Last edited:
