tylo_k2008
Well-Known Member
Hey Guys hoping someone can give me some advice.
Right now I have a 5lb co2 tank. With a main regulator on the co2 tank and a 4 tap secondary regulator. Right now I only have two taps up and running. One tap set to 12 psi (Kiltlifter beer) which is a 1/6th keg and the other at 40 psi for soda (corny keg).
I had both taps completely working fine, didnt notice any loss of pressure for the whole first week - week and a half, I had them set up. The co2 tank was just filled prior to pressurizing the two kegs. Went to Sadona, AZ Saturday morning for vacation. Pressure was fine and still perfect prior to leaving. When I arrived back Sunday afternoon the main regulator as well as the two guages I was using on the secondary regulator were all the way down to 10psi and the co2 tank was just about empty.
I just refilled the co2 tank today, but I wanted to get input before hooking it all back up again. Im thinking I had to have a leak as no one was home to mess with the pressure otherwise it should have stayed where I left it and the co2 tank would still be near filled. All my hoses have hose clamps, and I didn't hear any co2 escaping prior to all this. So where do I start? Is this normal? Any advice... Thanks!
Right now I have a 5lb co2 tank. With a main regulator on the co2 tank and a 4 tap secondary regulator. Right now I only have two taps up and running. One tap set to 12 psi (Kiltlifter beer) which is a 1/6th keg and the other at 40 psi for soda (corny keg).
I had both taps completely working fine, didnt notice any loss of pressure for the whole first week - week and a half, I had them set up. The co2 tank was just filled prior to pressurizing the two kegs. Went to Sadona, AZ Saturday morning for vacation. Pressure was fine and still perfect prior to leaving. When I arrived back Sunday afternoon the main regulator as well as the two guages I was using on the secondary regulator were all the way down to 10psi and the co2 tank was just about empty.
I just refilled the co2 tank today, but I wanted to get input before hooking it all back up again. Im thinking I had to have a leak as no one was home to mess with the pressure otherwise it should have stayed where I left it and the co2 tank would still be near filled. All my hoses have hose clamps, and I didn't hear any co2 escaping prior to all this. So where do I start? Is this normal? Any advice... Thanks!