EuBrew
Well-Known Member
Moving and have 3 year old twins so I haven't touched my stuff in 3 years.
Link for photos https://photos.app.goo.gl/ug2LgJW8vEbm8EcZ8
$1500 takes it all LOCAL COLUMBUS OHIO PICK UP NOT SPLITTING OUT PARTS.
See pics but it's a 3 Keggle system with a separate tank based off the Brewtroller platform.
*** Brewtroller board is either broken or I'm not smart enough to troubleshoot it****
All 120/240V connectors are twist lock.
6 Morotized stainless ball valves
6 One Wire Temp sensors
Stainless hinged false bottom
Stainless raised false bottom/hop stopper
3 stainless Chugger pumps
3 Electric Elements
Stainless tubing with Swagelok connectors
50 A Control Panel (see pics, lots a switches breakers heat sink etc)
50 A Spa Panel disconnect with approx 15 ft 6/3 wire to run to main breaker
Motorized mill with table and extended hopper
2 Chamber Ferm Chamber with (2) Fast Ferm Conicals includes fridge Cabinet on rollers
Fridge is new but I took out the thermostat planning to use brewtroller to control and it never happened. New thermostat i think is around 20 bucks
5 Ball lock kegs with extra lids, orings, posts
(2) 2000ML flasks
Stir plate
Milwaukee 102 PH Meter with solutions
Refractometer
Brewing books
Silicone tubing
Lots of water additives and yeast nutrient
4 cases 12 oz bottles
Guessing 40 bombers or more
Capper and caps
Bottle Tree
Oxygenation stone and tank
Hop Scale
Bunch of computer fans
12v power supply and extra relay board
Anything you see in the pics except the plastic cabinet goes.
**Note the 5000ML flask took its own life in spectacular fashion during the photo shoot so it's not included***
PM Me with any questions. The electric system all works but the brain. Could be used as is in bypass or manual mode or tinkered with and made awesome again.
Link for photos https://photos.app.goo.gl/ug2LgJW8vEbm8EcZ8
$1500 takes it all LOCAL COLUMBUS OHIO PICK UP NOT SPLITTING OUT PARTS.
See pics but it's a 3 Keggle system with a separate tank based off the Brewtroller platform.
*** Brewtroller board is either broken or I'm not smart enough to troubleshoot it****
All 120/240V connectors are twist lock.
6 Morotized stainless ball valves
6 One Wire Temp sensors
Stainless hinged false bottom
Stainless raised false bottom/hop stopper
3 stainless Chugger pumps
3 Electric Elements
Stainless tubing with Swagelok connectors
50 A Control Panel (see pics, lots a switches breakers heat sink etc)
50 A Spa Panel disconnect with approx 15 ft 6/3 wire to run to main breaker
Motorized mill with table and extended hopper
2 Chamber Ferm Chamber with (2) Fast Ferm Conicals includes fridge Cabinet on rollers
Fridge is new but I took out the thermostat planning to use brewtroller to control and it never happened. New thermostat i think is around 20 bucks
5 Ball lock kegs with extra lids, orings, posts
(2) 2000ML flasks
Stir plate
Milwaukee 102 PH Meter with solutions
Refractometer
Brewing books
Silicone tubing
Lots of water additives and yeast nutrient
4 cases 12 oz bottles
Guessing 40 bombers or more
Capper and caps
Bottle Tree
Oxygenation stone and tank
Hop Scale
Bunch of computer fans
12v power supply and extra relay board
Anything you see in the pics except the plastic cabinet goes.
**Note the 5000ML flask took its own life in spectacular fashion during the photo shoot so it's not included***
PM Me with any questions. The electric system all works but the brain. Could be used as is in bypass or manual mode or tinkered with and made awesome again.