• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Washington Electric HERM Recirculated Brewing System

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Northwest Brewer

New Member
Joined
Jan 10, 2019
Messages
2
Reaction score
1
Stout Tanks and Kettles 20 Gallon all electric HERMS brewing system.


Package deal ONLY! $4500.00


Selling my Electric Brewery modeled all electric brewing system utilizing Stout tanks 20 gallon hot liquor tank, brew kettle and mash tun with a 15 gallon Stout conical fermenter. The fermenter has been retro fit with a SS Brewtech brite tank chiller coil and utilizes an Eco Plus 1/4HP water chiller to maintain precise fermentation temperature. I built the electric control panel utilizing Kals’ design from The Electric Brewery website, but have added Minaric Triac drives to the panel to assist in more precise flow control by controlling pump speed. Additionally I have assembled a valve manifold to directly switch routing between system components, thereby eliminating the need to connect and disconnect during the brewing process (simplifies doing the brewing on my own, and minimizes cleanup). A partial list of equipment follows:

30A Electric Brewery control panel with GFCI protection

Stout HL20TW-RHC-SG-EL1-RF Hot Liquor Tank

Stout BK20TW-T1-SG-EL1 Brew Kettle

Stout MT20TW-RF-BO Mash Tun

Stout CF15TW-WH Conical Fermenter with Eco Plus 1/4HP Water Chiller and inkbird temperature controller

Stout SPOX Inline O2 Assembly

Stout Peltier Cooling Kit with Analog Technologies ATFC105D TEC Controller

Chugger Stainless Steel Pumps (Minaric TA500U Triac drives)

Brew Kettle Hop Spider

Monster Brewing Monster Mill

Advance Tabco SS 24x72 Work Table

Z Chillers Counterflow Wort Chiller

Maelstrom Stir Plate

Oxygen Tank and Flow Meter

10# CO2 Aluminum Tank

Dual Primary CO2 Regulator

Two Perlic 630SS Beer Faucets

Sears Kenmore Chest Freezer with Inkbird Temperature Controller

Ball Lock Corny Kegs (4 purchased new, 4 used)

Tri-clover Valving Maniforld, Tri-clover fittings, Silicone Tubing

Too much misc to list!
Bonus – Amphora Society PDA-1 with column extension and 6 gallon boiler for distillation

Over 11,000.00 invested, but I’m fixing to retire and move, so system has to find a new home.
upload_2019-1-18_11-39-34.png

upload_2019-1-18_11-40-1.png

upload_2019-1-18_11-40-28.png

upload_2019-1-18_11-40-50.png
upload_2019-1-18_11-39-34.png upload_2019-1-18_11-40-1.png upload_2019-1-18_11-40-28.png upload_2019-1-18_11-40-50.png upload_2019-1-18_11-39-34.png upload_2019-1-18_11-40-1.png upload_2019-1-18_11-40-28.png upload_2019-1-18_11-40-50.png
 
Stout Tanks and Kettles 20 Gallon all electric HERMS brewing system.


Package deal ONLY! $4500.00


Selling my Electric Brewery modeled all electric brewing system utilizing Stout tanks 20 gallon hot liquor tank, brew kettle and mash tun with a 15 gallon Stout conical fermenter. The fermenter has been retro fit with a SS Brewtech brite tank chiller coil and utilizes an Eco Plus 1/4HP water chiller to maintain precise fermentation temperature. I built the electric control panel utilizing Kals’ design from The Electric Brewery website, but have added Minaric Triac drives to the panel to assist in more precise flow control by controlling pump speed. Additionally I have assembled a valve manifold to directly switch routing between system components, thereby eliminating the need to connect and disconnect during the brewing process (simplifies doing the brewing on my own, and minimizes cleanup). A partial list of equipment follows:

30A Electric Brewery control panel with GFCI protection

Stout HL20TW-RHC-SG-EL1-RF Hot Liquor Tank

Stout BK20TW-T1-SG-EL1 Brew Kettle

Stout MT20TW-RF-BO Mash Tun

Stout CF15TW-WH Conical Fermenter with Eco Plus 1/4HP Water Chiller and inkbird temperature controller

Stout SPOX Inline O2 Assembly

Stout Peltier Cooling Kit with Analog Technologies ATFC105D TEC Controller

Chugger Stainless Steel Pumps (Minaric TA500U Triac drives)

Brew Kettle Hop Spider

Monster Brewing Monster Mill

Advance Tabco SS 24x72 Work Table

Z Chillers Counterflow Wort Chiller

Maelstrom Stir Plate

Oxygen Tank and Flow Meter

10# CO2 Aluminum Tank

Dual Primary CO2 Regulator

Two Perlic 630SS Beer Faucets

Sears Kenmore Chest Freezer with Inkbird Temperature Controller

Ball Lock Corny Kegs (4 purchased new, 4 used)

Tri-clover Valving Maniforld, Tri-clover fittings, Silicone Tubing

Too much misc to list!
Bonus – Amphora Society PDA-1 with column extension and 6 gallon boiler for distillation

Over 11,000.00 invested, but I’m fixing to retire and move, so system has to find a new home.
View attachment 607833
View attachment 607834
View attachment 607835
View attachment 607836View attachment 607833 View attachment 607834 View attachment 607835 View attachment 607836 View attachment 607833 View attachment 607834 View attachment 607835 View attachment 607836
Wish i would have seen this 2 weeks ago! I just pulled the trigger on the 20gal spike system. This would have been cheaper! Nice setup
 
Back
Top