- Joined
- Sep 6, 2016
- Messages
- 28
- Reaction score
- 4
Do gaskets for 1.5" Tri Clamp flanges (2" diameter) with a 3/4" bore exist? I see there's a number of 3/4" tube OD with 1.5" flange parts, tees, valves, hose barbs, out there. I'm wondering if the gaskets for these exist. Note, I'm not talking about the standard Tri-Clamp 1/2" or 3/4" with a 1" flange. If not what do you people who use 3/4" x 1.5" TC parts use for a gasket? I'm assuming the answer is just to use 1" gaskets and live with the gap. This is a hot side question for the record and I plan to dissemble between brews. If you have another solution, please let me know. Thanks in advance!
Example parts that could use a 1.5" x 3/4"OD (5/8"ID) gasket when mated to each other:
https://www.brewershardware.com/1_5-Tri-Clover-X-3-4-Hose-Barb.htmlhttps://www.proflow-dynamics.com/1-5-tri-clamp-by-3-4-ball-valve-quick-clean.htmlhttps://www.brewhardware.com/product_p/tc15tee_reduced34.htm
Example parts that could use a 1.5" x 3/4"OD (5/8"ID) gasket when mated to each other:
https://www.brewershardware.com/1_5-Tri-Clover-X-3-4-Hose-Barb.htmlhttps://www.proflow-dynamics.com/1-5-tri-clamp-by-3-4-ball-valve-quick-clean.htmlhttps://www.brewhardware.com/product_p/tc15tee_reduced34.htm