I had a ton of growlers floating around and no where to put them. So I built a simulated wort chiller on the wall of my bar in my house. It's really a Growler Display Rack.
First I bought a bunch of 3/4" black pipe fittings from Lowe's, Running's and Home Depot. I put them together to make these.
Make them the proper length so you catch the studs in your wall with at least two screws on each flange. My studs are spaced 16" wide the pipes are separated 14" vertically.
I bought 50' of 1/4" soft copper tube and cut it in half and made the coils on either end. I also bought 3 1/2" Black Metal Hooks for hanging pots and pans. Both were bought on Amazon.
Here is the look you get with it when all of the Growlers are hung. I have purchased a few 4" hooks for the shorter bodied Growlers.
It is mounted on the wall behind my projector screen that is mounted with 12" brackets so it clears all the obstacles.
I have added Philips hue lightning and a curtain to hide the projection screen.
First I bought a bunch of 3/4" black pipe fittings from Lowe's, Running's and Home Depot. I put them together to make these.
Make them the proper length so you catch the studs in your wall with at least two screws on each flange. My studs are spaced 16" wide the pipes are separated 14" vertically.
I bought 50' of 1/4" soft copper tube and cut it in half and made the coils on either end. I also bought 3 1/2" Black Metal Hooks for hanging pots and pans. Both were bought on Amazon.
Here is the look you get with it when all of the Growlers are hung. I have purchased a few 4" hooks for the shorter bodied Growlers.
It is mounted on the wall behind my projector screen that is mounted with 12" brackets so it clears all the obstacles.
I have added Philips hue lightning and a curtain to hide the projection screen.
Last edited: