- Joined
- Nov 17, 2007
- Messages
- 291
- Reaction score
- 2
I might be picking up a True TDD-1, and it has a tower with a single faucet. Is it terribly difficult to change out a tower on this or on commercial style kegerator in general?
Changing towers on a commercial kegerator
- Thread starter Fusorfodder
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
i changed out the single tap faucet on my beverage-air bm23 and installed a two tap faucet of about the same size. it was pretty simple and took only about 1/2 hour. remove screws holding stock tower, install new tower.
if you are lucky the new tower screw holes will coincide with the stock faucet, but i was not so fortunate. i had to utilze two (or three) of the stock holes, and had to drill new holes for the slightly larger faucet. it was not difficult....for me. YMMV!
if you are lucky the new tower screw holes will coincide with the stock faucet, but i was not so fortunate. i had to utilze two (or three) of the stock holes, and had to drill new holes for the slightly larger faucet. it was not difficult....for me. YMMV!
