Eric_Duel
Well-Known Member
First, a quick intro: I've been extract brewing for 4 years now. Plans were always to go to all-grain, but I haven't gotten there yet. Being frustrated with not getting to all-grain yet, I've decided to try brew in a bag.
I went to the fabric store yesterday and picked up 2 yards of three different fabrics. I got them from the bridal fabric area, this was all a strange experience for me.
I'd like some input into if these are what I should be using and in the right way. The plan is to have a finer material inside of a less fine material, with the outer material providing some strength and carrying the weight of the grain.
So, is the fine mesh material used for straining out the grain and particulates, but not the good stuff, number one or number two?
(Coins provided for reference)
Fabric One:
Fabric Two:
Fabric Three (Outer mesh for strength):
Thanks!
I went to the fabric store yesterday and picked up 2 yards of three different fabrics. I got them from the bridal fabric area, this was all a strange experience for me.
I'd like some input into if these are what I should be using and in the right way. The plan is to have a finer material inside of a less fine material, with the outer material providing some strength and carrying the weight of the grain.
So, is the fine mesh material used for straining out the grain and particulates, but not the good stuff, number one or number two?
(Coins provided for reference)
Fabric One:
Fabric Two:
Fabric Three (Outer mesh for strength):
Thanks!