$39.99 with cheap shipping. A little Gorilla Glue makes them perfect. They are always in good shape. I've bought multiple from them.
http://www.homebrewing.org/Loose-HandleBottom-Ball-Lock-keg-wPRV-Lid-_p_3917.html
$29.99. Low profile ball locks. NOT CONVERTED PIN LOCK!!! I own a couple of these to sit on the compressor hump. Came in great shape too.
http://www.homebrewing.org/Loose-HandleBottom-5-Gallon-Low-Profile-Ball-Lock-Keg-wLid-_p_4998.html
Best deals by far on the internet.
(No. I do not work for them. It's just a good deal that I'm excited to share.)
I found these at the same site if you are ok with 4 PIN LOCKS FOR CHEAP
http://www.homebrewing.org/FOUR-3-Ga...s-_p_4673.html
so I got em and here's a review -
4 PACK of 3 Gallon (AIH) Keg Review homebrewing.org
Just bought them From that above link from AIH-2 weeks or so ago. Came slightly pressurized with a bit of soda residue-
Outside - a bit worn and grimy (who knows where they've been !) no stickers!- Nothing PBW, Oxy-Clean and starsan couldn't handle.
Cleaned up the rubber good, no major scratches dents or dings-
Came out awesome !
Replaced all old with 'INCLUDED' new seals and o-rings. You'll need a pin lock socket to properly remove In and Out sides (and poppets) and clean. Mine were on there tight !
All hold pressure well and are filled with beer now ! Fit great in my new 12 Cu Ft Kegerator I'm starting to build.
They mention that there are 2 types they sell. (yea~ different size threads or something for some reason) I just asked for 4 of the same....and 4 similar ones came 3 days later~ UPS.
Excellent deal.
Also even though there is no pressure relief valve, I found that my Ball lock lids fit !! ..so any ball lock lid (with relieve valve) solves that PITA issue!
and its an issue always having to remove the Gas line → to purge gas.!!
Would totally recommended them for "BATCH SPLITTERS" ! or 3 gal brewers !!
They were 139$ when I first saw then-
I procrastinated (like you ) and they dropped to 125$ ! for 4 .