John Kimble
Well-Known Member
- Joined
- Aug 16, 2018
- Messages
- 80
- Reaction score
- 27
Team,
I know there have been many lengthy posts about this and that there are many tools online to assists...
But I am hoping I can get a simplified answer with regards to lactic acid addition.
Full BIAB system with 100% RO water used.
So far this is what I have come up with for mineral additions (I brew 5.5 gallon batches).
Typically I start with 8 gallons of water
1tsp Calcium chloride per 5g of water used (so about 1.3tsp Calcium Chloride)
**What I really need is a base addition of Lactic Acid acid per gallon of water for an RO profile.
Others***
For IPA/NEIPA 1tsp gypsum per 6g of water used (so about 1.3tsp gypsum)
Thanks for the simplification and help!
I know there have been many lengthy posts about this and that there are many tools online to assists...
But I am hoping I can get a simplified answer with regards to lactic acid addition.
Full BIAB system with 100% RO water used.
So far this is what I have come up with for mineral additions (I brew 5.5 gallon batches).
Typically I start with 8 gallons of water
1tsp Calcium chloride per 5g of water used (so about 1.3tsp Calcium Chloride)
**What I really need is a base addition of Lactic Acid acid per gallon of water for an RO profile.
Others***
For IPA/NEIPA 1tsp gypsum per 6g of water used (so about 1.3tsp gypsum)
Thanks for the simplification and help!