That looks like some serious pump head testing going on there
@
mongoose33, what make/model pump are you using there, and what's the flow rate once everything is daisy-chained?
I run 6 faucets with 12 (and one 15) foot lines and had zero expectation I could generate a respectable flow rate with them all daisy-chained to even a decent size pump. So I went parallel: the pump drives a manifold with six ball lock posts to plug all the keg ends to, and at the other end I made a six port PVC manifold to hook drain lines to each faucet with the collected runnings draining back to the pump bucket, with one of
these running the show.
Works great, I set it up with BLC/LLC solution, let it rip for 20 minutes while I do something else, come back, drain everything, stick the pump in a bucket of fresh water and push it all into another bucket, and it's done.
Thought I had pics of the two manifolds in action but I'm drilling a dry hole here. If I find them I'll add them...
Cheers!
[edit] Found 'em! Hiding in plain site under "KeezerKleaner" folder
So, here's the keg end manifold. Sorry it's a bit blurry.
View attachment 563292
...and here's the faucet end...
View attachment 563293
[jeeze, I'm glad I upgraded from that old GS4 to a GS8]