Switching to BIAB to reduce my footprint, and making some more room by parting with some fermenters and 10gal ball lock kegs. Live in Phoenix, not interested in shipping.
I have a 3 vessel Bottom Drain Keggle (15 gallon) setup that needs just a couple of easily sourced fittings and a controller to have a fully functioning e-brewery.... $700
HLT (Hot Liquor Tank) - Insulated with installed 4500 watt element, 36ft 1/2" copper heat exchanger, RV magnesium anode rod, 1/2" bottom drain coupler and sightless. Only needs the 1/2" NPT threaded thermometer designed for your controller, a 1/2" NPT threaded valve for the bottom and whatever 1/2" NPT threaded hose barbs you want to use to circulate thru the heat exchanger.
Mashtun - Insulated Bottom Drain Keggle with false bottom and Sanke Bottom Drain Kit (similar to Sanke Bottom Drain KIT, 5 Piece). Only needs 1/2" NPT threaded thermometer designed for your controller, and a 1/2" NPT threaded valve.
Boil Kettle - Sightglass, triclover element enclosure (Brewers Hardware RIMS Tube Covered Element Adapter - 1.5" Tri Clover Compatible X 1") and 5500 watt element, Sanke Bottom Drain Kit (similar to Sanke Bottom Drain KIT, 5 Piece). Only needs 1/2" NPT threaded thermometer designed for your controller, a 1/2" NPT threaded valve, and a wire and a plug to attach to element. (I think I may have some wire and you could just pick up the plug at HD or online).
2 Speidel 15 gallon fermenters (includes cap, airlock and spigot.)....will throw in extra strap and gasket if you buy both. Decided to change the way I am fermenting. $75 each.
I have 4 10 gallon kegs (3 Spartensburg and 1 Cornelius). $100 each.
I have a 3 vessel Bottom Drain Keggle (15 gallon) setup that needs just a couple of easily sourced fittings and a controller to have a fully functioning e-brewery.... $700
HLT (Hot Liquor Tank) - Insulated with installed 4500 watt element, 36ft 1/2" copper heat exchanger, RV magnesium anode rod, 1/2" bottom drain coupler and sightless. Only needs the 1/2" NPT threaded thermometer designed for your controller, a 1/2" NPT threaded valve for the bottom and whatever 1/2" NPT threaded hose barbs you want to use to circulate thru the heat exchanger.
Mashtun - Insulated Bottom Drain Keggle with false bottom and Sanke Bottom Drain Kit (similar to Sanke Bottom Drain KIT, 5 Piece). Only needs 1/2" NPT threaded thermometer designed for your controller, and a 1/2" NPT threaded valve.
Boil Kettle - Sightglass, triclover element enclosure (Brewers Hardware RIMS Tube Covered Element Adapter - 1.5" Tri Clover Compatible X 1") and 5500 watt element, Sanke Bottom Drain Kit (similar to Sanke Bottom Drain KIT, 5 Piece). Only needs 1/2" NPT threaded thermometer designed for your controller, a 1/2" NPT threaded valve, and a wire and a plug to attach to element. (I think I may have some wire and you could just pick up the plug at HD or online).
2 Speidel 15 gallon fermenters (includes cap, airlock and spigot.)....will throw in extra strap and gasket if you buy both. Decided to change the way I am fermenting. $75 each.
I have 4 10 gallon kegs (3 Spartensburg and 1 Cornelius). $100 each.