kegerator

Use code 15OFF and get 15% off when purchasing Pancho’s Keg Kooler™ Get ready for Football Season and tailgating. Pancho’s Keg Kooler™ is an elegant solution to serve cold beer without constant babysitting. It fits kegs up to a 1/4 barrel size. Outside dimensions: 30" x 15". Inside dimensions...

I recently found out I will likely be unable to drink much beer anymore due to a minor medical condition (huge bummer, but nothing serious), so I am looking to sell a significant stash of brewing supplies including a near-clone of Kal's 30 Amp 20 gallon electric brewery...

Hey everyone, I've had my kegerator for about 6–7 years. It's a converted Danby mini fridge, I bought new, that holds two cornies. I keep it on a Johnson Control at around 37 degrees, and it's been great so far. So I was really bummed to see that it's only cooling down to 50 degrees and the...

A couple years ago, I bought a used kegerator off of Craigslist. It's a nice Kenmore fridge, but the counter top was warped and cracked, and the tower was a simple one-tap with a sanke connection. So, I cut a piece of thick MDF board to replace the top and built a tap tower using the plan...

Hi I just bought a kegerator conversion kit that came with 2 corny kegs. I'm just wondering if people think 2 kegs plus the co2 will fit in a 4.4 cu model mini fridge. This is the particular one I'm looking at. Thanks so much for the help...

Well, this was my first metalworking and first woodworking project. I'm surprised the wife approved it, but it turned out well. Here's how it all went down. First, the finished product: So, I started by making a rolling base. I later had to find a way to cut it off because the swivel wheels...

I want to start by saying that I'm in the process of getting a fridge big enough so that I can get on board with this whole temperature controlled fermentation thing. My last 4 or 5 beers have been good, but I feel like the subtle off flavors that I pick up can only be due to my: Set it in the...

I've had my kegerator for years (on my second one) using picnic taps to dispense my homebrew. I decided to use picnic taps since I don't drink beer everyday and I felt that this way everything is kept cold and clean including the taps and the lines. However, I've had two occasions now where...

Hey fellow homebrewers, Can you help me solve this oxidation issue I've had for the past year? Issue: My beer in the keg oxidizes after the first pint is poured. The first pint is perfect and has no hint of oxidation. About two days later, heavy oxidation has set in and the beer quickly...

Igloo kegerator with dual Perlick 525SS taps, Taprite dual regulator, two 5 gallon CO2 tank, all spare O rings, O ring lub and parts, Spare single regulator, new Krome SankeD for standard kegs, three 5 gallon corny kegs, Johnson A119 temperature controller. All extremely clean (PBW and starsan)...

I'm getting myself 3 tap free standing dispenser/kegerator, and there must be something wrong with the way I approach this... After asking friends/reading online - I need help! I'd like to get kegerator that: 1) fits three pony kegs (1/6 gallon) (this - EdgeStar KC3000SSTRIP - seems to fit the...

Are you still serving your beer in a half-butt dispensing system? Don’t be that guy! Serve your beer in style! You no longer have to mess with jockey boxes, or rather, let the jockey box mess with you. Pancho’s Keg Kooler™ (patent pending) is the preferred method for dispensing your home-made...

I've got a Danby mini fridge. Its the DAR483BLS. It just fits two corney kegs and a five pound tank. Its great. Except that the temp control goes from 46 to 36 and it has some pretty wide temp tolerances. Not so great when I want to ferment in it in a corny. Problem is that it's not using an...

So I currently have two kegs in my kegerator. I’m using a duel regulator with my Co2 tank. Pressure is at 10-11psi with 10ft of 3/16 beer line for both taps, and the temp is at 37f. One of my kegs pours perfectly fine, while the other pours nothing but foam. I’m completely stumped and can’t...

BI means built-in, suitable for under-counter mount. NK means “no tap kit included”.

I recently moved and my new house doesn't have the best setup for my home brewery, and can see it being several years before I would be back up and running after finishing the basement. Therefore, I have decided to sell my electric home brewery. If you have any questions let me know. I have lots...

My beloved keezer (converted freezer to cooler via JCI PENN thermostat) is not cooling after a recent power outage. One can hear the compressor grinding away, but not cooling. Ideas on what to try to resolve would be much appreciated. Warm beer is no fun! Many thanks!

In the attached image I have circled the object I'm confused about. I don't actually know where that is supposed to go. Can anybody help me?

Does anyone know off hand a mini fridge that can fit 2 cornys and that I can drill hole in the side? Most threads on here that answer this question seem to be dated. I will have plenty of room to provide the manufacturer recommended gaps on sides. It's for this project here...

13-tap Keezer that I built from a commercial chest freezer. 12 out of the 13 taps are stainless Perlicks. There is now a stout faucet (#1 tap) that is stainless, as well. Beer lines are Bev-Seal Ultram. Gas lines are reinforced/braided. There are 2 CO2 manifolds built on the inside. Not in...