Does anyone own a EBC II or have you built it?

wps-hbt
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
JBOGAN

JBOGAN

Well-Known Member
Joined
Jan 30, 2013
Messages
611
Reaction score
124
Location
Warren
Looking to move from stovetop to electric and I want to build something very similiar to the EBC II. While I am not the greatest at wiring I did build a controller with two pids and and two pumps, that was for a three vessel propane setup that I never used. That being said, if someone could help me build this I would be willing to sell my two auber 2362 for pennies on the dollar. Its hard for me to justify a $300 dollar buy for a controller without a pid or any sensors hence the DIY. Looking for simplicity.


http://www.highgravitybrew.com/store/pc/EBC-II-with-Infinite-Power-Control-276p3073.htm
 
JBOGAN said:
Looking to move from stovetop to electric and I want to build something very similiar to the EBC II. While I am not the greatest at wiring I did build a controller with two pids and and two pumps, that was for a three vessel propane setup that I never used. That being said, if someone could help me build this I would be willing to sell my two auber 2362 for pennies on the dollar. Its hard for me to justify a $300 dollar buy for a controller without a pid or any sensors hence the DIY. Looking for simplicity.


http://www.highgravitybrew.com/store/pc/EBC-II-with-Infinite-Power-Control-276p3073.htm
Click to expand...

you can buy the kit with directions from stilldragon for about $38.. http://stilldragon.com/index.php/diy-controller-kit.html . add about $30-40 bucks in additional hardware and the EBC enclosure from home depot and you have a clone built for under $100... Honestly if you built your pid controlled setup this would be a walk in the park... much easier to wire up.
 
JBOGAN, I own but no longer use an EBC II controller that I'd be willing to sell. Send me a message if you'd like to discuss. If not, good luck with your build!!
 
BeeRRunBrewery said:
JBOGAN, I own but no longer use an EBC II controller that I'd be willing to sell. Send me a message if you'd like to discuss. If not, good luck with your build!!
Click to expand...

Do you still have the EBC II available BeeRRunBrewery? If you still have it...how much are you looking for and is the version that allows for the temperature sensor?

:mug:
 

Similar threads

D
Entry Level Controller Opinions
Replies
9
Views
2K
augiedoggy
augiedoggy
T
Help me choose 240v brewery controller - No DIY
Replies
17
Views
6K
Nmnbrewer
Nmnbrewer
E
DIY 120v eBIAB Controller Help
2 3
Replies
97
Views
13K
enormous13
E
jcs401
Looking for a simple/DIY temp control
Replies
7
Views
971
augiedoggy
augiedoggy
T
Brau 120V 20A or High Gravity EBC-LT 120V? Help!!
2
Replies
72
Views
7K
dogpoundbrewery
D
SSBrew 300

Latest posts

Back
Top