Full Boil? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Extract Brewing > Full Boil?

Reply
 
Thread Tools
Old 01-15-2013, 05:56 AM   #1
Toasty27
Recipes 
 
Dec 2012
Las Cruces, New Mexico
Posts: 17


With Tax time approaching I am going to upgrade just a little bit. I want to do a full boil instead of adding the water. I am still on the extract/specialty grain kits. How big of a pot should i get? And is there a certain amount of BTU output on burners i should look for? I've seen one for 55,000 BTUs and another for 120,000 BTUs. Of course the price is about $50 difference. Any help is appreciated!

 
Reply With Quote
Old 01-15-2013, 06:41 AM   #2
nukebrewer
Brew the brew!
HBT_LIFETIMESUPPORTER.png
 
nukebrewer's Avatar
Recipes 
 
Oct 2008
Groton, CT
Posts: 5,666
Liked 2865 Times on 1733 Posts


If you're doing 5 gallon batches an 8 gallon pot should serve you quite well. That's what I've been using for the past 4 years without issue. If you can afford it, obviously go for the higher BTU burner, but the 55K will be adequate if you can't afford the 120K.
__________________
The only thing more asinine than stupid rules is the enforcement of rules simply because they are the rules.

Inhopsicated: A Beer Blog

Inhopsicated on Twitter

 
Reply With Quote
Old 01-15-2013, 06:47 AM   #3
CityOChampBrew
Recipes 
 
Feb 2012
Pittsburgh, Pa
Posts: 654
Liked 59 Times on 49 Posts


And if you can afford it I would recommend a 15 gal brew kettle as that will allow you to grow to 10 batches if you ever decide to do so. Let me just say it is nice to have double to product from just a little bit more time on the brew day.
__________________
Primary: cabernet sauvignon, El dorado pale
Seconday: Golding abbey, Flanders Red, Cocoa IPA, S.C.A. IPA
Bottled: Golding kolsch, Raspberry Mead, Berlinner Weisse, Caliente Pale ale, Amarillo/Citra wheat
Kegged empty

 
Reply With Quote
Old 01-15-2013, 04:29 PM   #4
Toasty27
Recipes 
 
Dec 2012
Las Cruces, New Mexico
Posts: 17

Word. eventually ima move to all grain, but ima take it one step at a time, full boil - partial mash - all grain. Thanks for the input!

 
Reply With Quote
Old 01-15-2013, 04:35 PM   #5
stpug
Recipes 
 
Nov 2012
Posts: 3,610
Liked 666 Times on 560 Posts


I currently use a 44-quart turkey fryer stainless pot for my 5 gallon batches. It might be a tiny bit overkill but when you start with 7+ gallons at the beginning of the boil and you hit your hot break, that foam can raise up to within a few inches of the top. After seeing this happen many times I would recommend a 10 gallon pot for 5 gallon boils, however a minimum of 8 gallons would suffice (just keep a spray bottle on hand in case the foam starts to get away from you).

 
Reply With Quote
Old 02-06-2013, 12:40 AM   #6
Toasty27
Recipes 
 
Dec 2012
Las Cruces, New Mexico
Posts: 17

http://www.amazon.com/Bayou-Classic-...ble+jet+burner

http://www.amazon.com/Bayou-Classic-...ble+jet+burner

which one should i get?

 
Reply With Quote
Old 02-06-2013, 01:00 AM   #7
EineProsit
 
EineProsit's Avatar
Recipes 
 
Nov 2011
Taylorsville, NC, NC
Posts: 241
Liked 30 Times on 24 Posts


If u can afford it go bigger badder
__________________
Man All I wanna do is go Homebrew!

 
Reply With Quote
Old 02-06-2013, 01:34 AM   #8
BxBrewer
 
BxBrewer's Avatar
Recipes 
 
Oct 2012
Bronx, NY
Posts: 447
Liked 60 Times on 43 Posts


I'm going to a 8 gallon pot myself. However I'm staying with extract brewing until I retire. To many guys in my club are going back to BiaB or extract from big systems. I'd rather knock out a brew day and then go fishing or play a round of golf lol.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
half batch full boil same as full batch partial boil? Firechicken Beginners Beer Brewing Forum 5 10-15-2012 09:53 PM
Full Boil Extract Boil with question on batch volumes tjashing Extract Brewing 11 05-02-2012 03:19 PM
First full boil - questions regarding strength of boil, hop utilization, hot break heyjaffy Beginners Beer Brewing Forum 3 04-14-2011 01:56 AM
What adjustment should I make to hops for full boil vs. partial boil? DaveAllen Beginners Beer Brewing Forum 18 03-15-2010 02:46 AM
Question about water amount in full boil or partial boil neldred Beginners Beer Brewing Forum 6 10-17-2009 03:50 AM


Forum Jump