BK_BREWERY
Well-Known Member
- Joined
- Mar 24, 2009
- Messages
- 82
- Reaction score
- 1
The one thing I can not find (or maybe I overlooked it) was whether the AC-3CP-MD pump motor is sealed? I know it's not submersible, but I was hoping to close the comparison between it with optional parts and the LG 3-MD-HC.
Thanks for your participation at HBT, Walter!
Based on the previous post, the BC-3 is a sealed magnet while the AC-3cp-MD is exposed? So apples to apples with the LG 3-MD-HC would be a BC-3CP-MD with the optional parts, correct?
Walter may over rule me but loking at the manual online for the 3 series motors:
ELECTRICAL:
Models are 115 Volt or 230 Volt, 60Hz or 50/60Hz, 1
phase, A.C. motors. The motors are thermal overload
protected and have sealed ball bearings, which allows the
pump to be run continuously.
So i think you're good there.
Also it is my understanding that you are replacing the impeller either way regardless of which modle you buy AC or BC so the question is are the magnets open or sealed in the impeller in the polysulfone material?