i'm messing with my collar on my keezer for mounting the secondaries. I have Norgren regulators, so the cornelius and taprite brackets won't work (i think). I'm trying to build up a custom wood and maybe sheetmetal case for it. Any ideas as to how people mounted theirs?
mounting secondary regulator
- Thread starter mendozer
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
All of the Norgren secondary CO2 regs I've found for sale have a bracket and look like this:
What's up with yours?
Cheers!
What's up with yours?
Cheers!
OP
OP
mendozer
Well-Known Member
https://www.homebrewtalk.com/f51/easy-homemade-secondary-regulator-319033/
these are mine fully assembled. The back of the Norgren has some kind of nut that i believe opens up the regulator. I haven't found those brackets for the regs at least on Norgren's site
these are mine fully assembled. The back of the Norgren has some kind of nut that i believe opens up the regulator. I haven't found those brackets for the regs at least on Norgren's site
OP
OP
mendozer
Well-Known Member
I'm making a wooden "case" with a sheet metal front. I'll be putting holes around the adjustment dials and gauges. I just hope I don't have to mess with my secondaries b/c it'll be a pain to remove them.
should I put silicone around the joints (even though I have teflon tape there already)? for a 100% sure seal?
should I put silicone around the joints (even though I have teflon tape there already)? for a 100% sure seal?
