AGBrewer Well-Known Member Joined Feb 6, 2007 Messages 417 Reaction score 8 Nov 6, 2007 #1 I am going to brew a series of 5 gallon batches(normal is 10) but I realized that my mashtuns thermometer is mounted up too high to touch 5 gallons worth of water. Any ideas on extending the probe?
I am going to brew a series of 5 gallon batches(normal is 10) but I realized that my mashtuns thermometer is mounted up too high to touch 5 gallons worth of water. Any ideas on extending the probe?
Bobby_M Vendor and Brewer HBT Sponsor Joined Aug 3, 2006 Messages 27,859 Reaction score 9,141 Location Whitehouse Station, NJ Nov 6, 2007 #2 Not that I can think of. That's why I put my probe thermo bulkheads way down on the kegs, under the first bump.
Not that I can think of. That's why I put my probe thermo bulkheads way down on the kegs, under the first bump.
R rohanski Well-Known Member Joined Aug 14, 2006 Messages 432 Reaction score 1 Location Boerne, Texas Nov 6, 2007 #3 Throw a few bricks in it!
Kegerator Well-Known Member Joined Oct 26, 2007 Messages 111 Reaction score 0 Location Michigan Nov 6, 2007 #4 If you can get you hands on some copper wire, loop it around the thermometer, and hang it from the side of the kettle.
If you can get you hands on some copper wire, loop it around the thermometer, and hang it from the side of the kettle.
david_42 Well-Known Member Joined Oct 8, 2005 Messages 25,581 Reaction score 196 Location Oak Grove Nov 6, 2007 #5 Based on personal experience, moving the thermometer is the only workable approach. I'd just use a handheld one for the small batches.
Based on personal experience, moving the thermometer is the only workable approach. I'd just use a handheld one for the small batches.