akthor
Well-Known Member
So we got a new motor to motorize my grain mill, the old motor I got off of Ebay wasn't strong enough. The new motor came with no power cord so it needs to be wired up. Since it can go forward and reverse I figure I would use the control box and wiring from the old motor. But I have no idea what wires go to what?
So coming out of the control box are 4 wires: white, black, green, and red.
Coming out of the motor: black, yellow, a black wire that has writing on it, and two sets of 3 wires whose ends are crimped together which I assume means they belong together: black, white, orange and black, red, blue
I've attached some pictures that hopefully will help.
So what do I do? Thanks for any help.
So coming out of the control box are 4 wires: white, black, green, and red.
Coming out of the motor: black, yellow, a black wire that has writing on it, and two sets of 3 wires whose ends are crimped together which I assume means they belong together: black, white, orange and black, red, blue
I've attached some pictures that hopefully will help.
So what do I do? Thanks for any help.