HopShepard
Member
- Joined
- Jul 17, 2008
- Messages
- 6
- Reaction score
- 0
I got the Ritetemp 6020 thermostat from Home Depot to wire into my Mother of a Fermentation Chamber build. Problem is I can't get my fan to work in cool mode.
I've been able to set it up and have the fan(computer power supply fan) run when the fan switch is in the on position, and have the fan run all the time no matter the switch position. I can't get it to turn on in the cool position though with my set temp set well below room temp.
I'm using a 5v cell adapter for power, and had it working with another thermostat, but wanted to use the 6020 because it's easy to take out the temp. probe and make it longer so it can become a remote temp probe.
Anyways, I've tried a bunch of combos, mainly the adapter + >> G, fan + to RC, and adapter - >> fan -. There are 7 jumpers on the top, and I think I have them in the right config, but could be wrong.
Any ideas(other than use a different thermostat)?
I've been able to set it up and have the fan(computer power supply fan) run when the fan switch is in the on position, and have the fan run all the time no matter the switch position. I can't get it to turn on in the cool position though with my set temp set well below room temp.
I'm using a 5v cell adapter for power, and had it working with another thermostat, but wanted to use the 6020 because it's easy to take out the temp. probe and make it longer so it can become a remote temp probe.
Anyways, I've tried a bunch of combos, mainly the adapter + >> G, fan + to RC, and adapter - >> fan -. There are 7 jumpers on the top, and I think I have them in the right config, but could be wrong.
Any ideas(other than use a different thermostat)?