I am not an electrical guy at all. I'm looking for advice, flaws, or any input really. Be rough I want to get it right before I wire it all up. I have some of the parts in the image and am sourcing some of the rest.
First the Parts:
Green lines are ground, Red are hot, black neutral
1. GFCI http://www.amazon.com/TRC-90265-6-012-Shockshield-Portable-Protection/dp/B000XU5MEG/ref=pd_cp_hi_1
2. PLUG http://www.amazon.com/Leviton-R03-05266-C-Straight-Blade-5-15P/dp/B000P9SXXW/ref=sr_1_19?ie=UTF8&qid=1287202479&sr=8-19
3. Busbar http://www.amazon.com/gp/product/B0009TUFWA/ref=oss_product
4. SPST Switch, no link but it is 20A @ 125V
5. Fuse Holder - Planning on .25A Quick Burn for the PID and 20A for the SSR
6. Auber SYL-2362 (those wires should hit pins 1 and 2) http://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=106
7. 40A SSR http://www.auberins.com/index.php?main_page=product_info&cPath=2&products_id=30
8. 15A Wall Outlet http://www.amazon.com/Leviton-689-E-Recessed-Receptacle-Residential/dp/B0017WKSWA/ref=sr_1_1?ie=UTF8&qid=1287202698&sr=8-1
9. Indicator Lights 125V 1/2W
Now the Questions
-Do you see anything wrong here?
-Can I wire the indicator directly to the toggle
-Do I need any more fuses? (indicator lights?)
-Any special considerations when mounting this in an enclosure?
-Should I ground anything else?
Misc Notes
I'm planning to use 12AWG wire
Not sure on the enclosure yet but may be metal, may be plastic.
That is a heat sink under the SSR
This is to run a freezer as a fermentation chamber. I want to just snake the thermocouple into the freezer and plug the freezer into this. The enclosure will be portable.
First the Parts:
Green lines are ground, Red are hot, black neutral
1. GFCI http://www.amazon.com/TRC-90265-6-012-Shockshield-Portable-Protection/dp/B000XU5MEG/ref=pd_cp_hi_1
2. PLUG http://www.amazon.com/Leviton-R03-05266-C-Straight-Blade-5-15P/dp/B000P9SXXW/ref=sr_1_19?ie=UTF8&qid=1287202479&sr=8-19
3. Busbar http://www.amazon.com/gp/product/B0009TUFWA/ref=oss_product
4. SPST Switch, no link but it is 20A @ 125V
5. Fuse Holder - Planning on .25A Quick Burn for the PID and 20A for the SSR
6. Auber SYL-2362 (those wires should hit pins 1 and 2) http://www.auberins.com/index.php?main_page=product_info&cPath=1&products_id=106
7. 40A SSR http://www.auberins.com/index.php?main_page=product_info&cPath=2&products_id=30
8. 15A Wall Outlet http://www.amazon.com/Leviton-689-E-Recessed-Receptacle-Residential/dp/B0017WKSWA/ref=sr_1_1?ie=UTF8&qid=1287202698&sr=8-1
9. Indicator Lights 125V 1/2W
Now the Questions
-Do you see anything wrong here?
-Can I wire the indicator directly to the toggle
-Do I need any more fuses? (indicator lights?)
-Any special considerations when mounting this in an enclosure?
-Should I ground anything else?
Misc Notes
I'm planning to use 12AWG wire
Not sure on the enclosure yet but may be metal, may be plastic.
That is a heat sink under the SSR
This is to run a freezer as a fermentation chamber. I want to just snake the thermocouple into the freezer and plug the freezer into this. The enclosure will be portable.
Last edited by a moderator: