EuBrew
Well-Known Member
I have a single tap kegerator that I've had running for a little over a year and it's time to expand now that I back into brewing (SWMBO and I had a baby). So the plan is to go from a single to a three tap system. I would also like to be able to have a 4th keg on gas for a set it and forget it backup.
Here's what I have.
Single 60psi regulator
Crappy chrome faucet
sankey coupler
2 1/6 kegs
Here's what I think I need.
2000 psi tank gauge
corny kegs
connectors for liquid and gas for corny
3 ss shanks (I haven't measured but I'm pretty sure 4" will do)
3 525ss faucets
Beer hose
Gas hose
nipples for shanks and other hardware
3 way manifold like pictured below.
What am I forgetting? As for the manifold, can I take the plug out of the end and add another check valve insteading of paying extra for the 4 manifold block?
Also where do you recommend to get EVERYTHING. I've seen lots of these items on lots of sites, but there always seems to be one piece missing, or the prices are retarded.
Thanks in advance!!
Here's what I have.
Single 60psi regulator
Crappy chrome faucet
sankey coupler
2 1/6 kegs
Here's what I think I need.
2000 psi tank gauge
corny kegs
connectors for liquid and gas for corny
3 ss shanks (I haven't measured but I'm pretty sure 4" will do)
3 525ss faucets
Beer hose
Gas hose
nipples for shanks and other hardware
3 way manifold like pictured below.
What am I forgetting? As for the manifold, can I take the plug out of the end and add another check valve insteading of paying extra for the 4 manifold block?
Also where do you recommend to get EVERYTHING. I've seen lots of these items on lots of sites, but there always seems to be one piece missing, or the prices are retarded.
Thanks in advance!!