Prewired PID controller

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sgraham602

Supporting Member
HBT Supporter
Joined
Nov 27, 2010
Messages
440
Reaction score
34
Location
Matthews
Anyone know of a vendor or someone who builds prewired controllers for a RIMs tube? (other than Sabco).

I want to add a RIMs tube to my set up. I can build the tube itself, but wiring is a new animal for me...don't want to get in over my head.
 
If you just want a single PID to control a RIMS tube and nothing else, this is the cheapest option I know of:
http://www.highgravitybrew.com/productcart/pc/EBC-SV-with-Infinite-Power-Control-158p3986.htm

Just be aware that it uses a mechanical relay rather than an SSR (see this thread).

If you're in the market for something more elaborate, places that sell more complete control panels are The Electric Brewery, Brewmation, Brewmaster Controls, and Swede’s Custom Control Systems.
 
If you just want a single PID to control a single to control a RIMS tube and nothing else, this is the cheapest option I know of:
http://www.highgravitybrew.com/productcart/pc/EBC-SV-with-Infinite-Power-Control-158p3986.htm

Just be aware that it uses a mechanical relay rather than an SSR (see this thread).

If you're in the market for something more elaborate, places that sell more complete control panels are The Electric Brewery, Brewmation, Brewmaster Controls, and Swede’s Custom Control Systems.
might be missing something, but why the big heatsink if its a mechanical contactor?
 
might be missing something, but why the big heatsink if its a mechanical contactor?

Good question.

They don't post a schematic or a picture of the internals. But here's the post where the guy from High Gravity says it has no SSR.
 
Back
Top