Besides the fact that, as android mentioned, you don't really need to use a secondary vessel, if you did choose to use one, your bottling bucket
is not a good idea.
The purpose of a brite tank (your secondary) is to help clear the beer, but in order to integrate the priming solution with the beer, you would then have to stir the beer, rather than rack on top of it.
This would then kick up all the stuff you patiently let settle on the bottom. This sort of cancels out all that you did with secondarying.
You will find that many of us leave our beers in primary for 3-4 weeks, skip secondary and bottle. Just search for the 10,000 threads under "long Primary" or "no secondary" and you will see all the resaons why we do it, and the explanations behind...There's at least one thread a day on the topic, so it's really not hard to find the discussion pretty much hashed to death.
but if you choose to secondary you should wait til your
Hydrometer tells you fermentation is complete.
If I do secondary (which is only when I am adding fruit or oak) I wait 14 days then rack for another 2 weeks...then I bottle.
But that's only if I am dry hopping or adding oak or fruit, which I rarely do, so for me it's a month than bottle,
Honestly you will find your beer will be the best if you ignore the kit instructions, and don't rush it.
But Even Palmer says you should wait with kits...
How To Brew said:
Leaving an ale beer in the primary fermentor for a total of 2-3 weeks (instead of just the one week most canned kits recommend), will provide time for the conditioning reactions and improve the beer. This extra time will also let more sediment settle out before bottling, resulting in a clearer beer and easier pouring. And, three weeks in the primary fermentor is usually not enough time for off-flavors to occur.
Now as to your use of the term "secondary fermenter." "Secondary fermenter" is actually a misnomer and a mistake many brewers don't grasp....the secondary has nothing to do with he process of "secondary fermentation" which is part of the normal yeast life cycle, one of the stages of fermentation. Which is done in your bucket or carboy.
You shouldn't rack a beer to secondary until fermentation is complete...
no fermentation should be happening in your secondary.
The secondary we are referring to is also called a "brite tank" it is the carboy where people move their beer to clear, or to add fruit, or hops for dry hopping... and to let the yeast and other things fall down...I
Here's John Palmer's explanation of the Secondary fermentation Phase
The fermentation of malt sugars into beer is a complicated biochemical process. It is more than just the conversion of sugar to alcohol, which can be regarded as the primary activity. Total fermentation is better defined as three phases, the Adaptation or Lagtime phase, the Primary or Attenuative phase and a Secondary or Conditioning phase. The yeast do not end Phase 2 before beginning Phase 3, the processes occur in parallel, but the conditioning processes occur more slowly. As the majority of simple sugars are consumed, more and more of the yeast will transition to eating the larger, more complex sugars and early yeast by-products. This is why beer (and wine) improves with age to a degree, as long as they are on the yeast. Beer that has been filtered or pasteurized will not benefit from aging.
The reactions that take place during the conditioning phase are primarily a function of the yeast. The vigorous primary stage is over, the majority of the wort sugars have been converted to alcohol, and a lot of the yeast cells are going dormant - but some are still active.
The Secondary Phase allows for the slow reduction of the remaining fermentables. The yeast have eaten most all of the easily fermentable sugars and now start to turn their attention elsewhere. The yeast start to work on the heavier sugars like maltotriose. Also, the yeast clean up some of the byproducts they produced during the fast-paced primary phase. ...
It's easy to see how confusing the terms are...that's why we try to get outta the habit of saying secondary fermentation...and just say secondary...or bright tank (mostly just secondary, dropping fermenter or fermentation, since fermentation should be finished before you rack it to the secondary. After the hydrometer reading stays the same for 3 days.
New brewers often rack way too early, and often interrupt the secondary phase because of this, and that is why you often see panic threads about Krausens forming in secondary, because the yeast was really still in the primary phase of fermentation when it was moved.
And it starts building a krauzen house again....
If you do choose to use a "bright tank" it's best to wait til fermentation is complete, you know that by taking 2 gravity readings over a 3 day period. If the grav hasn't changed, then you can rack it without having a krausen develop...though sometimes it does anyway.
If that wasn't clear, Donman sums it up pretty well;
dontman
I thought Palmer was actually pretty good about differentiating between Secondary Fermenting and Secondary Fermentation. I found Papazian to be less so. When I read Papazian the first time I was left with the exact impressions that you have and when I look at my brew logs from 1992 I was regularly doing 4 and 5 day primaries and then secondary. He actually made me feel like the sooner off the yeast cake the better.
You are confusing secondary fermentation with secondary fermenter. Very easy to do.
Secondary fermentation occurs while the yeast is still in solution immediately after the conversion of sugars to alcohol. During that time there is tons of proteins and partially digested sugars in solution in addition to the waste products of the yeast, plus any esters and fusel they create while they ferment. During secondary fermentation the yeast will clean up these esters, and the fusels, and reabsorb a lot of their waste products.
Once this process is complete if you choose THEN you can rack to the Secondary Fermenter. This is a also called a bright tank or clearing tank and it is where the sedimentation occurs. This is where the most of the proteins and other detritus fall out of solution and the beer clears. Yes, the yeast is still present in this tank but because the vast majority has been left behind in the primary tank any benefit from the yeast at this stage is greatly diminished.
So if you haven't figured it out, NOTHING should be happening in the Secondary (brite tank) except you beer clearing......