nostalgia
Well-Known Member
EDIT: Parts list. I will update this as things change and I have time.
Auberins.com
pid SYL-2352
rtd PT100-L50NPT
contactor CN-PBC402-120V
panel conn RTDCON
Automationdirect.com
63a disconnect SD2-063-RR
handle SD-HRY
shaft SD-S200
black switch GCX3300
red switch GCX3252-120L
30a breaker WMZS2B30
10a breaker WMZS1B10
DIN rail DN-R35S1-2
Radio Shack
120v fan
Panel-mount fuse holders
1A fast-blow fuses
10ga wire (red/black)
Home Depot
6/3 Cable
Plastic housing and fittings
Copper ground lug
Ground bar
I've already gotten started on the heatstick for my build. This thread will document the overall progress on the brewhouse.
First parts in today: 25 gallon stainless drums for the HLT and MLT. I'm going to use my current 15 gallon kettle for boiling for now. At least until funds replenish a bit
These drums are beautiful. MUCH heavier gauge steel than I expected, and the bottoms welded instead of rolled.
-Joe
Auberins.com
pid SYL-2352
rtd PT100-L50NPT
contactor CN-PBC402-120V
panel conn RTDCON
Automationdirect.com
63a disconnect SD2-063-RR
handle SD-HRY
shaft SD-S200
black switch GCX3300
red switch GCX3252-120L
30a breaker WMZS2B30
10a breaker WMZS1B10
DIN rail DN-R35S1-2
Radio Shack
120v fan
Panel-mount fuse holders
1A fast-blow fuses
10ga wire (red/black)
Home Depot
6/3 Cable
Plastic housing and fittings
Copper ground lug
Ground bar
I've already gotten started on the heatstick for my build. This thread will document the overall progress on the brewhouse.
First parts in today: 25 gallon stainless drums for the HLT and MLT. I'm going to use my current 15 gallon kettle for boiling for now. At least until funds replenish a bit
These drums are beautiful. MUCH heavier gauge steel than I expected, and the bottoms welded instead of rolled.
-Joe