chaseruff10
New Member
Hey all,
I was just getting ready to brew some ale and went to get my fermentation mini-fridge to the right temperature. I am using a Johnson Controls digital temp controller (A419, prewired) with the set points below. I have the controller jumpered to cooling mode cut-out at set point as per the manual. The LED light on the controller is on indicating that the probe is calling for cooling, but the fridge compressor is not running. I checked the fridge and when plugged straight into the wall it works. For kicks I plugged one of those cheap ground check indicators into the controller where the fridge usually plugs in and it gives me the "open hot" error.
SP - 65 F
DIF - 4
ASd - 12
OFS - 0
SF- 0
Anyone got any suggestions???
I was just getting ready to brew some ale and went to get my fermentation mini-fridge to the right temperature. I am using a Johnson Controls digital temp controller (A419, prewired) with the set points below. I have the controller jumpered to cooling mode cut-out at set point as per the manual. The LED light on the controller is on indicating that the probe is calling for cooling, but the fridge compressor is not running. I checked the fridge and when plugged straight into the wall it works. For kicks I plugged one of those cheap ground check indicators into the controller where the fridge usually plugs in and it gives me the "open hot" error.
SP - 65 F
DIF - 4
ASd - 12
OFS - 0
SF- 0
Anyone got any suggestions???