Was going to make a stir plate from a PC fan and a 12v wall adapter, but then I was given a cooling fan that plugs strait into a wall outlet. Can I use a light dimmer to safely control the speed.
Stirplate Question
- Thread starter muse435
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
Bearclaw215
Well-Known Member
- Joined
- Sep 20, 2013
- Messages
- 167
- Reaction score
- 12
The dimmer should be fine. Just be safe with your wiring dont leave stuff exposed.
I've also seen wall plugs that let you switch between something like 1.5v, 3v, 6v and 9v at radioshack. I forget the actual voltage numbers but i think thats close, something like that might be worth checking out.
Good luck and be safe!
I've also seen wall plugs that let you switch between something like 1.5v, 3v, 6v and 9v at radioshack. I forget the actual voltage numbers but i think thats close, something like that might be worth checking out.
Good luck and be safe!
Stealthcruiser
Well-Known Member
Get a ceiling fan variable speed control for your 110 fan.
OP
OP
My new stir plate
OP
OP
This is what the fan I used looks like
Similar threads
