I just set up my keezer 5 days ago and went out to find my beer uncarbonated despite my secondary gauges reading 10 psi (which is what it was at before as well)
https://www.homebrewtalk.com/f51/mendozers-keezer-331192/
that's my keezer. My only thoughts are these:
My Kynar check valves aren't letting gas through (although that would be dumb since lots of people use them)
my secondary setup is leaking CO2 (although I don't hear it and with 10 psi coming out of 2 gauges I would hear it)
my tank is empty (except it's not, not by a long shot)
exterior leak at my QD setup (see link) but there's again no audible leak
what's happening?
https://www.homebrewtalk.com/f51/mendozers-keezer-331192/
that's my keezer. My only thoughts are these:
My Kynar check valves aren't letting gas through (although that would be dumb since lots of people use them)
my secondary setup is leaking CO2 (although I don't hear it and with 10 psi coming out of 2 gauges I would hear it)
my tank is empty (except it's not, not by a long shot)
exterior leak at my QD setup (see link) but there's again no audible leak
what's happening?