RidingDonkeys
Well-Known Member
I admit, I'm a bad beer drinker. I haven't had a keg since college, a long time ago. I just got a True TDD-2 kegerator, and got it up and running today. So, I did what any other man would do and immediately got my CO2 bottle filled and a fresh keg of Highland Gaelic Ale. If this goes well, I'll start kegging using Sanke kegs for the homebrew.
I cleaned and sanitized everything. I filled a sanke keg with sanitizer and ran it through the lines without a problem.
I disconnected the micromatic connector and threw it on the keg of goodness. Now all I'm getting is CO2. No foam, nothing going into the line. Straight CO2 coming out of the spout.
I've played with the pressure, running it from 2 to 20 psi, no change. What am I missing here?
I cleaned and sanitized everything. I filled a sanke keg with sanitizer and ran it through the lines without a problem.
I disconnected the micromatic connector and threw it on the keg of goodness. Now all I'm getting is CO2. No foam, nothing going into the line. Straight CO2 coming out of the spout.
I've played with the pressure, running it from 2 to 20 psi, no change. What am I missing here?