I'm talking about the actual black pipe gas distribution manifold. I'm going to have a 3 banjo burner setup, similar to herc1354's, and I'm debating building it myself, or going to a local propane shop and having them build it. I'm just a bit leery about fooling around with propane. If someone in PDX had experience with a shop, I was going to drop by and talk about my setup with them and see what their cost would be to build a manifold for me.
However, the more I'm reading through the forums, thought, I may just suck it up, go to Lowes, and build my own... it seems that if you use a bunch of gas tape on all of the threads and crank it down, and leak check it, it is pretty safe.
However, the more I'm reading through the forums, thought, I may just suck it up, go to Lowes, and build my own... it seems that if you use a bunch of gas tape on all of the threads and crank it down, and leak check it, it is pretty safe.