lgtg
Well-Known Member
Hi everyone,
Just finished putting together my 3 gallon MLT from the DYI thread on Mini-Mashing. I was lucky to find a Rubbermaid 3gl. to be volume flexible with.
I have a Tru-temp digital and all the photos I've seen have some kind of thermometer inside that thing, question is;
Is the probe touching the mash itself or is it just measuring the interior temp?
The probe (if you haven't seen it) is about five inches long before it "L's" onto the SS braided cable back to the digital unit. If I drill through the cooler's lid, it may not go downward far enough to touch the mash....
Just finished putting together my 3 gallon MLT from the DYI thread on Mini-Mashing. I was lucky to find a Rubbermaid 3gl. to be volume flexible with.
I have a Tru-temp digital and all the photos I've seen have some kind of thermometer inside that thing, question is;
Is the probe touching the mash itself or is it just measuring the interior temp?
The probe (if you haven't seen it) is about five inches long before it "L's" onto the SS braided cable back to the digital unit. If I drill through the cooler's lid, it may not go downward far enough to touch the mash....