Hey all. I have a keezer with a 4-way manifold and four kegs. I use a 5 lb c02 tank. I've had three kegs hooked up for a few weeks with no problems. Last night I kegged a new brew and hooked it up to the gas. The keg is a used corny keg and I replaced all 5 o-rings and used lube. Today when I opened the keezer the gas tank is empty. The new keg is empty (pulled pressure relief valve shows no pressure) along with one other keg. Two of the kegs still hold pressure. I unhooked all gas disconnects from the kegs and will need to wait until Monday to refill the gas.
First question, what's the first place to look for a leak? Keg lid? Gas disconnect/post? Should all my connections have Teflon tape and plastic washers? I'm using 1/4" swivel nuts for all connections. Also, will all my beer be fine?
Thanks, love the forum.
First question, what's the first place to look for a leak? Keg lid? Gas disconnect/post? Should all my connections have Teflon tape and plastic washers? I'm using 1/4" swivel nuts for all connections. Also, will all my beer be fine?
Thanks, love the forum.