I recently purchased 2 used Better Bottles with the spigots and all of the rubber o-rings needed to be replaced.
I did a search on here and came up empty. So, to save others the frustration of figuring out what is needed, here is what I used.
#206 - For the plug on the cap
#47 - The 2 little o-rings on the plunger
#7 - For inside the nut that butts up against the bottle wall
FYI, a #3 stopper fits the ported hole to make cleaning the bottle easier.
I also lubed up all of the o-rings with some food grade grease.
I did a search on here and came up empty. So, to save others the frustration of figuring out what is needed, here is what I used.
#206 - For the plug on the cap
#47 - The 2 little o-rings on the plunger
#7 - For inside the nut that butts up against the bottle wall
FYI, a #3 stopper fits the ported hole to make cleaning the bottle easier.
I also lubed up all of the o-rings with some food grade grease.