:rockin: I just test fired my natural gas brew burner...it rocks! If you want one, here's what to order:
Small Burner (130,000 BTU),
Medium Burner (145,000 BTU), or
Large Burner (200,000 BTU), and
3/8" Natural Gas Hose
You'll also need a 3/4" NPT male plug (there's a large inlet hole on the bottom), and a minimum of one 3/8" NPT male to male coupler, along with the means to tap into your home natural gas supply. NOTE: THIS IS NATURAL GAS, NOT PROPANE!
EDIT: I forgot to mention that you'll need a way to control the amount of gas going to the burner. A ball valve rated for gas seems to work quite nicely.
And now for the bad stuff...
EDIT: There is none!!! I thought the customer service was a bit shoddy at first, but they proved me wrong within 48 hours.
Small Burner (130,000 BTU),
Medium Burner (145,000 BTU), or
Large Burner (200,000 BTU), and
3/8" Natural Gas Hose
You'll also need a 3/4" NPT male plug (there's a large inlet hole on the bottom), and a minimum of one 3/8" NPT male to male coupler, along with the means to tap into your home natural gas supply. NOTE: THIS IS NATURAL GAS, NOT PROPANE!
EDIT: I forgot to mention that you'll need a way to control the amount of gas going to the burner. A ball valve rated for gas seems to work quite nicely.
And now for the bad stuff...
EDIT: There is none!!! I thought the customer service was a bit shoddy at first, but they proved me wrong within 48 hours.
Last edited by a moderator: