Search results

Not really using it as a blowoff just as an inexpensive airlock. I txfr after secondary is complete just to leave the nastys behind. I sometimes like to bring my kegs to get togethers and the sediment will get stirred up if you serve in the same keg that you use as a secondary. But if you leave...

I unthread the fitting and remove the tube before putting on the "blow off tube". I then dry hop using a hop bag in the keg as a secondary (7-10 days) finally I will rack into a fresh kehg to serve.

It makes great treat for the chickens and goats

Simply set a post in the ground and then made my own burner attachments equally spaced around the post. I use propane and gravity on my brew days. Mash tun looks dirty but that is expanding foam I used in the lid because those lids are hollow. The bags that are hanging are my hops pre...

Just started using corny's as my secondary. I found a 1/2" id tubing fits directly over the threads. So I pull a tube out and slip the clear tubing over the fitting then put a loop in it and fill with a little star san to make an airlock that will handle the small amount of fermenting that...

Set a post in the ground and welded burner mounts evenly around so I can gravity fluid down around the center post. tbox?id=7463043634[/IMG]

June 26, 2012 lots of luplin in some early cones of cascade can't wait for some fresh hop home brew.

my new hop trellis. made with surplus material from my business and a scrap hand crank from an old boat trailer so I can lower the bines down for harvest

Just started using corny's as my secondary. I found a 1/2" id tubing fits directly over the threads. So I pull a tube out and slip the clear tubing over the fitting then put a loop in it and fill with a little star san to make an airlock that will handle the small amount of fermenting that...

I have hops from my garden that i would like to use in this receipe. What do you suggest to use given the following choices? Nugget Chinook Cascade