joeybeer
Well-Known Member
- Joined
- Dec 13, 2009
- Messages
- 567
- Reaction score
- 26
I wasn't really sure where to put this but since it involves my electric build I thought this was as good as anywhere..
Has anyone tapped a triclamp cap ?? I'd like to screw in a 1/2 NPT ball valve..
I know I could use a more expensive solution, but I'd like to install a heating element in one 2" cap and a 1/2" ball valve on another I thought I'd try this first..
I'd like to tap them so I can just screw them in, but I could also get nuts welded on a drilled hole, or use regular "weldless" bulkhead fittings..
What do y'all think ?
Has anyone tapped a triclamp cap ?? I'd like to screw in a 1/2 NPT ball valve..
I know I could use a more expensive solution, but I'd like to install a heating element in one 2" cap and a 1/2" ball valve on another I thought I'd try this first..
I'd like to tap them so I can just screw them in, but I could also get nuts welded on a drilled hole, or use regular "weldless" bulkhead fittings..
What do y'all think ?